More Fun With a Thermal Imaging Camera

How does hot air at 450°C show up on a thermal imaging camera:

It doesn't until you allow it to hit an object (in this case paper)
 See video here:

Comparison of Atmospheric Transmission Germanium Lens response and quoted FLIR camera response
Note that the camera response is in a highly transmissive part of the atmospheric transmissive window - to put the passband in a place where the GHGs radiate would give continual fogging due to the air between object and camera rather than the object desired.

How good is bubble wrap (packing material with 0.5cm air bubbles trapped between plastic)

Single and double layers over hand. The spot temperature has had the emissivity adjusted so don't believe the temperature!
See video here

Using the software's ability to calculate emissivity from the displayed temperature and the known hand temperature (approx 37°C with emissivity 0.92) gives the following results:
1 layer of bubblewrap requires an emissivity of 0.70 to correct the hand temperature to 37°C
2 layers of bubblewrap requires an emissivity of 0.69 to correct the hand temperature to 37°C 
4 layers of bubblewrap requires an emissivity of 0.58 to correct the hand temperature to 37°C
8 layers of bubblewrap requires an emissivity of 0.55 to correct the hand temperature to 37°C

Compare this to 2 layers of cling film (saran wrap/ldpe) here

2 layers of ldpe are equivalent to 4 layers of bubble wrap (8layers of plastic and some air)

So an IR window of 2 layers bubble wrap  (bubbles interspersed) will be better at IR transmission and probably better at conduction prevention.

You need aluminised bubble wrap to prevent hypothermia - need to stop the loss of IR!!!!


  1. What about hot CO2 ? Ah, then I remembered, Your camera doesn't necessary see CO2 IR-bands..

    But If you could reflect IR of hot CO2-jet to paper by some parabolic reflector and measure the paper warming.. ?

  2. Camera response and Atmosperic response curves now added to the post. Focussing IR onto paper would be possible.

  3. Quickly this site will indisputably be famous among all blogging people, because of its fastidious articles or reviews.wwom

  4. It’s my first time to visit this site & I’m really surprised to see such impressive stuff out there.kristianw27

  5. I was wondering, what are the real applications of this FLIR?
    Besides, seeing the heat?
    Why is it going to be big?
    Thermal imaging Camera

  6. Hi, You explained the topic very well. The contents has provided meaningful information thanks for sharing info
    thermal imaging

  7. Very nice and helpful information has been given in this article. I like the way you explain the things. Keep posting. Thanks..
    Commercial plumbing services